background image

 

Limited Lifetime Warranty  

 

Miller Performance Ltd. warrants that products manufactured by Miller Performance Ltd will be free from 
defects in materials and workmanship for the life that you own your  vehicle.

  If any such product proves 

defective during the applicable warranty period, Miller Performance Ltd., at its option, either will repair the defective 
product with charge for parts and labor or will provide a replacement in exchange for the defective product. 

Items 

not manufactured by Miller Performance Ltd. have a limited warranty of one year past the date of purchase.

 

In order to obtain service under this warranty, the customer must notify Miller Performance Ltd. of the defect before 
the expiration of the warranty period and make suitable arrangements for the performance of service.  In all cases the 
customer will be responsible for packaging and shipping the defective product back to the service center specified by 
Miller Performance Ltd., with shipping charges prepaid. Miller Performance Ltd. shall pay for the return of the product 
to the customer if the shipment is within North America, otherwise the customer shall be responsible for all shipping 
charges, insurance, duties and taxes, if the product is returned to any other location.  

This warranty shall not apply to any defect, failure or damage caused by improper use or failure to observe proper 
operating procedures per the product specification or operators manual or improper or inadequate maintenance and 
care. Miller Performance Ltd. shall not be obligated to furnish service under this warranty 1) to repair damage resulting 
from attempts by personnel other than Miller Performance Ltd’s. representatives to repair or service the product; 2) to 
repair damage resulting from improper use or connection to incompatible equipment; 3) to repair damage resulting 
from operation outside of the operating or environmental specifications of the product.  

MILLER PERFORMANCE LTD. LIABILITY FOR THE MERCHANTABILITY AND USE OF THE PRODUCT IS 
EXPRESSLY LIMITED TO ITS WARRANTY SET OUT ABOVE. THIS DISCLAIMER AND LIMITED 
WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL REPRESENTATIONS AND WARRANTIES 
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR OF FITNESS FOR PARTICULAR PURPOSE, WHETHER ARISING FROM 
STATUTE, COMMON LAW, CUSTOM OR OTHERWISE.  THE REMEDY SET FORTH IN THIS DISCLAIMER 
AND LIMITED WARRANTY SHALL BE THE EXCLUSIVE REMEDIES AVAILABLE TO ANY PERSON. 
MILLER PERFORMANCE LTD. SHALL NOT BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
CAUSED BY THE DEFECT, FAILURE OR MALFUNCTION OF THIS PRODUCT, NOR ANY OTHER LOSSES 
OR INJURIES, WHETHER A CLAIM FOR SUCH DAMAGES, LOSSES OR INJURIES IS BASED UPON 
WARRANTY, CONTRACT, NEGLIGENCE, OR OTHERWISE.  BY ACCEPTING DELIVERY OF THIS 
PRODUCT, THE PURCHASER EXPRESSLY WAIVES ALL OTHER SUCH POSSIBLE WARRANTIES, 
LIABILITIES AND REMEDIES. MILLER PERFORMANCE LTD. AND PURCHASER EXPRESSLY AGREE 
THAT THE SALE HEREUNDER IS FOR COMMERCIAL OR INDUSTRIAL USE ONLY AND NOT FOR 
CONSUMER USES AS DEFINED BY THE MAGNUSOM-MOSS WARRANTY ACT OR SIMILAR STATE 
CONSUMER WARRANTY STATUTE 

 

 

Содержание Smart Fan


















Отзывы: