5
1.4 Tools Required
The Following tools and supplies (not included) or similar tools and supplies are required
for fast and proper installation of this Miller Performance product:
Minimum requirements:
-
Flathead Screwdriver
-
Philips Screwdriver
-
Various socket wrenches
-
Various Box Wrenches
-
Coolant Catch Pan
-
Soldering Iron
-
Solder
1.5 Safety and Precautions
Warning:
Ensure vehicle cannot roll when working on the vehicle
Warning:
Disconnect the ground strap (negative) whenever doing work
on electrical or fuel systems.
Warning:
Never run the engine unless the work area is well ventilated.
Carbon monoxide kills!
Caution:
Before starting each procedure, ensure that you have all the necessary
tools and parts on hand. Read all instructions thoroughly; do not
attempt shortcuts use only parts and materials that are included in this
kit or approved by Miller Performance.
Caution:
Be careful when using soldering iron. Temperatures can be in excess of
400 degrees and burns can be serious.
