6
2. Installation
2.1 Clutch Fan Removal
IF YOU ALREADY HAVE AN E-FAN INSTALLED SKIP THIS SECTION AND
GO TO SECTION 2.4
In order to install your Miller Smart Fan you will need to remove the factory clutch fan as
well as the radiator. Removing the radiator make the installation much easier and also is a
good opportunity to do a coolant flush.
1.
Remove clutch Fan. The clutch fan is a reverse thread, using a long wrench in a
quick motion; you will want to “crack” loose the threads. After you have loosened
the clutch fan simply spin it off with your hand.
Figure 1: Crack Threads loose
Figure 2: Spin Fan off by hand
