Miller ProHeat 35 OM-222 166F, Руководство пользователя

Страница: 18 / 72

OM-222 166 Page 12
4-3. Tipping
Y Be careful when placing or
moving unit over uneven
surfaces.
4-4. Electrical Service Guide
50 Hz
Three
Phase
60 Hz Three Phase
Input Voltage 400 460 575
Input Amperes At Rated Output 60 50 40
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes
1
Circuit Breaker
1
, Time-Delay
2
70 61 45
Normal Operating
3
80 70 60
Min Input Conductor Size In AWG
4
6 8 8
Max Recommended Input Conductor Length In Feet (Meters)
254
(77)
214
(65)
334
(102)
Min Grounding Conductor Size In AWG
4
8 8 10
Reference: 2005 National Electrical Code (NEC) (including article 630)
1 Choose a circuit breaker with time-current curves comparable to a Time Delay Fuse.
2 Time-Delay fuses are UL class RK5 .
3 Normal Operating (general purpose - no intentional delay) fuses are UL class K5 (up to and including 60 amp), and UL class H ( 65 amp and above).
4 Conductor data in this section specifies conductor size (excluding flexible cord or cable) between the panelboard and the equipment per NEC Table
310.16. If a flexible cord or cable is used, minimum conductor size may increase. See NEC Table 400.5(A) for flexible cord and cable requirements.
Y
Caution: Failure to follow these fuse and circuit breaker recommendations could create an electric shock or fire hazard. These
recommendations are for a dedicated branch circuit that applies to the rated output and duty cycle of the welding power source.