Miller ICE-40T, Руководство пользователя

Страница: 16 / 44

.
A complete Parts List is available at www.MillerWelds.com
OM-237 974 Page 12
4-2. Duty Cycle And Overheating
Duty Cycle is percentage of 10 min-
utes that unit can cut at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, Temperature
trouble light goes On, and cooling
fan runs. Wait fifteen minutes for
unit to cool or temperature light to
go off. Reduce amperage or duty
cycle before cutting or gouging.
NOTICE − Exceeding duty cycle
can damage unit or gun and void
warranty.
Overheating
sduty1 5/95 / Ref. 805 325-A
0
15
Minutes
A
OR
Reduce Duty Cycle
For Units Connected to a 208 Volt Circuit or a 230 Volt Circuit:
50% Duty Cycle At 40 amperes, 140 volts DC (typical cutting)
5 Minutes Cutting 5 Minutes Resting
13-1/8 in.
(333 mm)
4-3. Power Source Dimensions And Weight
loc_2 3/96 - Ref. 805 325-A
5-1/2 in.
(140 mm)
9 in.
(229 mm)
Dimensions And Weight
24 lb (10.9 kg)
including torch
!
Do not move or operate unit
where it could tip.
4-4. Torch Dimensions And Weight
Ref. 802 877
3.5 lb (1.6 kg) w/20 ft (6.1 m) Cable
1 in.
(25 mm)
8-3/8 in.
(213 mm)
1-3/8 in.
(35 mm)