Miller Digital Performance Series, Руководство пользователя

Страница: 19 / 32

OM-256476 Page 17
6-3. Replacing The Lens Covers On Digital Elite Standard Helmets
OM-256476 Page 1
Ref. 805012
!
Never use the auto-
darkening lens with-
out the inside and
outside lens covers
properly
installed.
Welding spatter will
damage the auto-dark-
ening lens and void the
warranty.
1 Front Lens Gasket
2 Outside Lens Cover
3 Lens Assembly Gasket
4 Lens Assembly
5 Inside Lens Cover
6 Lens Frame
Remove the lens assembly
to remove either lens cover.
To remove the lens assem-
bly, push down on the helmet
bottom retaining arms and
push the retaining clips to-
ward the outside of the
helmet. Lift up on the assem-
bly and pull free of the
helmet.
Outside Lens Cover
Remove the outside lens
cover by pushing cover into
the helmet. Remove the rub-
ber lens gasket and install on
the new lens cover. Reinstall
the lens assembly.
Be sure wide edge of
gasket faces helmet
shell.
Be sure the flat side of
lens cover gasket faces
the helmet shell.
Inside Lens Cover
To replace the inside lens
cover, remove the lens as-
sembly from the lens frame
by pushing up on the top two
retaining tabs while gently
pushing the lens free.
Remove the lens cover by
sliding it out of either side.
Replace with the new cover
lens and reinstall the assem-
bly in the helmet.
1
2
3
4
5
6
1-1. Replacing The Lens Covers On Digital Elite Standard Helmets
Never use the auto-darkening lens
without the inside and outside lens
covers properly installed. Welding
spatter will damage the auto-darken-
ing lens and void the warranty.
1 Front Lens Gasket
2 Outside Lens Cover
3 Lens Assembly Gasket
4 Lens Assembly
5 Inside Lens Cover
6 Lens Frame
Remove the lens assembly to remove either
lens cover.
To remove the lens assembly, push down on
the helmet bottom retaining arms and push
the retaining clips toward the outside of the
helmet. Lift up on the assembly and pull free
of the helmet.
Outside Lens Cover
Remove the outside lens cover by pushing
cover into the helmet. Remove the rubber
lens gasket and install on the new lens cov-
er. Reinstall the lens assembly.
�
Be sure wide edge of gasket faces hel-
met shell.
�
Be sure the flat side of lens cover gas-
ket faces the helmet shell.
Inside Lens Cover
To replace the inside lens cover, remove the
lens assembly from the lens frame by push-
ing up on the top two retaining tabs while
gently pushing the lens free.
Remove the lens cover by sliding it out of ei-
ther side. Replace with the new cover lens
and reinstall the assembly in the helmet.