Miller Digital Performance Series, Руководство пользователя

Страница: 13 / 32

OM-256476 Page 11
4-5. Lens Delay Control
OM-256476 Page 1
1
A Digital Elite lens is
shown.
1 Lens Delay Adjustment
Buttons
2 Mode Control Button
Use the Lens Delay Short
and Long buttons to adjust
the time for the lens to switch
to the clear state after weld-
ing or cutting.
The delay is particularly use-
ful in eliminating bright
after-rays present in higher
amperage
applications
where the molten puddle re-
mains bright momentarily
after welding. Use the Lens
Delay Control buttons to ad-
just delay from 0 to 10 (0 1 to
The delay ranges for each
mode are as follows:
Weld, Cut, And X-Modes
0–10
Grind Mode No delay ad-
justment
There is no lens delay
adjustment in the Grind
mode, and in the Cut
mode (when sensitivity
is set to 10).
X Mode is not present on
Lens Delay Adjustment
Procedure
Press Auto On/Off but-
ton to turn helmet On.
Press Mode button to se-
lect desired function:
Weld, Cut, or X-Mode.
Use Short and Long ad-
justment
buttons to
select desired delay.
Begin welding or contin-
ue with other lens
adjustments.
2
1-1. Lens Delay Control
�
A Digital Elite lens is shown.
1 Lens Delay Adjustment Buttons
2 Mode Control Button
Use the Lens Delay Short and Long buttons
to adjust the time for the lens to switch to the
clear state after welding or cutting.
The delay is particularly useful in eliminating
bright after-rays present in higher amperage
applications where the molten puddle re-
mains bright momentarily after welding. Use
the Lens Delay Control buttons to adjust de-
lay from 0 to 10 (0.1 to 1.0 second).
The delay ranges for each mode are as
follows:
Weld, Cut, And X-Modes - No. 0–No. 10
Grind Mode - No delay adjustment
�
There is no lens delay adjustment in
the Grind mode, and in the Cut mode
(when sensitivity is set to 10).
�
X-Mode is not present on Performance
helmets.
Lens Delay Adjustment Procedure
� Press Auto On/Off button to turn helmet
On.
� Press Mode button to select desired
function: Weld, Cut, or X-Mode.
�
Use Short and Long adjustment buttons
to select desired delay.
� Begin welding or continue with other
lens adjustments.