OM-256476 Page 10
1
1
Lens Delay Adjustment
Buttons
2
Mode Control Button
Use the Lens Delay Short
and Long buttons to adjust
the time for the lens to switch
to the clear state after weld-
ing or cutting.
The delay is particularly use-
ful in eliminating bright
after-rays present in higher
amperage applications
where the molten puddle re-
mains bright momentarily
after welding. Use the Lens
Delay Control buttons to ad-
just delay from 0 to 10 (0.1 to
1.0 second).
The delay ranges for each
mode are as follows:
Weld, Cut, And X-Modes
−
0–10
Grind Mode
−
No delay ad-
justment
There is no lens delay
adjustment in the Grind
mode, and in the Cut
mode (when sensitivity
is set to 10).
X-Mode is not present on
Performance helmets.
Lens Delay Adjustment
Procedure
Press Auto On/Off but-
ton to turn helmet On.
Press Mode button to se-
lect desired function:
Weld, Cut, or X-Mode.
Use Short and Long ad-
justment buttons to
select desired delay.
Begin welding or contin-
ue with other lens
adjustments.
2
Digital Elite Lens Shown
4-5. Lens Delay Control
