background image

.

A complete Parts List is available at www.MillerWelds.com

OM-257811 Page 7

SECTION 4 − SPECIFICATIONS

4-1. Serial Number And Rating Label Location

The serial number and rating information for this product is located on the back panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on cover of this manual.

4-2. Specifications

.

The correction factor on the cooling power at an ambient temperature of 104

5

F (40

5

C) is 0.625.

Recirculating Coolant System For Water-Cooled GTAW Torches And GMAW Guns

Use with power sources rated up to 280 amps.

Coolant Tank Capacity

1.3 gal (4.9 L)

Rated Cooling Power

1.33 kW at 1.06 qt/min at 77

°

F (4540 BTU/hr at 1 L/min  at 25

°

C)

Maximum Cooling Power

3.4 kW at 3.8 qt/min at 77

°

F (11,600 BTU/hr at 3.6 L/min at 25

°

C)

Input Voltage

115 VAC, Single Phase, 60 Hz

Input Amperage

5.9 Amperes

4-3.

Coolant Specifications

Do not use conductive coolant.

Application

Coolant

GTAW Or Where High Frequency Current Is Used

Low Conductivity Coolant 043810*

Distilled Or Deionized Water Okay Above 32

°

F (0

°

C)

GMAW Or Where High Frequency Current Is Not Used

Low Conductivity Coolant 043810*

Aluminum Protecting Coolant 043809*

Distilled Or Deionized Water Okay Above 32

°

F (0

°

C)

Where Coolant Contacts Aluminum Parts

Aluminum Protecting Coolant 043809*

*Coolants 043810 and 043809 protect to -37

°

F (-38

°

C) and resist algae growth.

NOTICE − Use of any coolant other than those listed in the table voids the warranty on any parts that come in contact with the coolant (pump, radiator,
etc.).

4-4.

Environmental Specifications

A. IP Rating

IP Rating

IP23

This equipment is designed for outdoor use. It may be stored, but is not intended to be used outside during precipitation unless sheltered.

IP23 2014−06

B. Temperature Specifications

Operating Temperature Range

Storage/Transportation Temperature Range

14

°

F to 104

°

F (−10

°

C To 40

°

C)

−4 to 131

°

F (−20 to 55

°

C)

Temp1_016- 08

Содержание Coolmate 1.3





















Отзывы: