Miller Big Blue 800 DUO PRO, Руководство пользователя

Страница: 37 / 88

Complete Parts List available at www.MillerWelds.com
OM-262 752 Page 33
5-13. Making Single Operator CC Weld Connections
258 836
!
Stop engine.
NOTICE − Do not exceed machine duty
cycle.
Welder B (right) weld output terminals
are disabled in Single Operator mode.
Connect only to Welder A (left) termi-
nals for Single Operator mode opera-
tion.
Use Single Operator mode for CC weld-
ing only. Welder B weld output termi-
nals are disabled in Single Operator
mode. (see Section 6-2).
See Section 5-14 for proper cable size.
1 Electrode Holder Cable
2 Work Cable
For Stick/TIG welding Direct Current Elec-
trode Positive (DCEP), connect work cable
to Negative (−) terminal and electrode hold-
er cable to Positive (+) terminal.
For Stick/TIG Direct Current Electrode Neg-
ative (DCEN), connect work cable to Posit-
ive (+) terminal and electrode holder cable
to Negative (−) receptacle.
Be sure Process Selector switch is set
correctly. See Section 6-4.
Tools Needed:
3/4 in.
Welder B (right) Terminals
Inactive In Single Operator Mode
1
2
Direct Current Electrode Positive
(DCEP) connections are shown.
Welder A (Left) Side