Miller Big Blue 450X Duo CST, Руководство пользователя

Страница: 42 / 64

Complete Parts List available at www.MillerWelds.com
OM-247969 Page 38
8-2. Routine Maintenance
!
Stop engine before maintaining.
See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
= Check = Change = Clean = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-5,
5-6, 5-7,
and 8-9
Coolant Level Fuel Level Oil Level Oil, Fuel Spills
Every
50
Hours
Weld Terminals
Every
100
Hours
Section 8-4
Battery Terminals Air Cleaner Hoses Air Cleaner Element Unreadable Labels
Every
500
Hours
1/2 in.
(13 mm)
NOTICE − Change engine
oil and filter after initial 50 to
75 hours of use.
Engine
Manual,
Section 8-6,
8-9
Weld Cables Fan Belt Tension Oil Oil Filter Spark Arrestor
Inline Fuel Filter Fuel Filter Radiator Thermostat
Every
1000
Hours
OR
SLUDGE
FUEL
Section 5-6,
8-5, 8-7,
8-9, and
Engine
Manual
Radiator Fluid Level Inside Unit Valve Clearance* Drain Sludge
Slip Rings*
Brushes*
Every
2000
Hours
Injectors*
8-3. Cleaning Unit
Clean unit exterior, including stainless steel if so equipped, frequently to prevent rust.
NOTICE − Use of a power washer is acceptable; however, cover or avoid vents on front panels of CST units.