Miller 244584, Руководство пользователя

Страница: 22 / 28

.
A complete Parts List is available at www.MillerWelds.com
OM-237519 Page 18
SECTION 6 − MAINTENANCE
Prior to each use, visually inspect blanket for wear, rips, tears, sewn seams coming loose, broken or split insulation. Replace blanket if necessary.
NOTICE − If blanket surface is torn to the point that internal cable insulation is exposed to the outside, blanket must be replaced; if insulation is torn
on connector cables exposing internal wiring, blanket must be replaced (see Section 6-1). Do not attempt to repair blanket under any
circumstances. Failure to comply with product maintenance schedule will void warranty.
Clean mud or dirt from blanket, straps, wires and connectors on a daily basis to maintain efficient operation and consistent heating. Surface of blanket
that contacts metal pipe or metal part must be kept free of debris at all times.
Inspect induction blanket sleeve and blanket for worn spots or damage such as holes, tears, exposed wires, etc. or lack of blanket flexibility (i.e.
unusually stiff blanket), replace sleeve or blanket if necessary.
To help prevent rapid wear and breakdown of blanket and sleeve insulating surface, apply GE ® RTV 116 silicone coating material to worn areas as
necessary. For more information on where to purchase GE RTV 116 silicone, call the Momentive Information Center at 1 − 800 − 295 − 2392.
6-1. Precautionary Labels
1
2
.
Be sure to read and follow information on precautionary label.
1 Induction Blanket Sleeve
2 Induction Heating Blanket
3 Precautionary Label
3
Ref. 805174-C / 195807-E / 260044-C