Miller 244584, Руководство пользователя

Страница: 18 / 28

.
A complete Parts List is available at www.MillerWelds.com
OM-237519 Page 14
B. Two Standard Blankets Connected In Parallel To A Single Power Source
.
Do not use two blankets connected in series to the power source.
Input Power
Supply
Induction
Power Source
Blanket
(Wrap Or Flat)
One Half Of Output Amperes Thru
Each Blanket
Blanket
(Wrap Or Flat)
Extension
Cable
Extension
Cable
.
Blankets connected to power source in a parallel arrangement
must be identical in size (same part number).
Optional
On/Off
Remote
A two blanket parallel arrangement requires two equally sized blankets and two extension cables connected to a single power source. The output
power from the power source will divide equally between the two blankets (assuming both blankets are in direct contact with the surface of the material
to be heated). This arrangement will increase the time to reach desired heating temperature as compared to a single blanket arrangement. However,
output current will increase about 40% (i.e. 224A x 1.4 = 314A). Current will divide equally between the blankets resulting in each blanket receiving
approximately 157 amperes. Since the parallel amperage is below the 160 amperes maximum, long-term operation (100% duty cycle) is acceptable.