background image

DECLARATION OF CONFORMITY

for European Community (CE marked) products.

MILLER Electric Mfg. Co., 1635 Spencer Street, Appleton, WI  54914  U.S.A.

 

declares that the

product(s) identified in this declaration conform to the essential requirements and provisions of
the stated Council Directive(s) and Standard(s).

Product/Apparatus Identification:

Product

Stock Number

Unitor UWI 150 STL

709659

Council Directives:

2006/95/EC Low Voltage

2004/108/EC Electromagnetic Compatibility

Standards:

IEC 60974­1: 2005 Arc Welding Equipment – Welding Power Sources

IEC 60974­3: 2007 Arc Welding Equipment – Arc Striking and Stabilizing Devices

IEC 60974­10: 2007 Arc Welding Equipment – Electromagnetic Compatibility Requirements

EN 50445 Product family standard to demonstrate compliance of equipment for resistance welding, arc
welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields
(0 Hz – 300Hz) BS EN 50445:2008.

US Signatory: 

_____________________________________             ____________________________________

David A. Werba              

Date of Declaration

MANAGER

,

 PRODUCT DESIGN COMPLIANCE

      

October 29, 2010

241518­C

Содержание UNITOR UWI 150 Auto-Line





























Отзывы: