Miller Electric UNITOR UWI 150 Auto-Line, Руководство пользователя

Страница: 17 / 28

OM-220 340 Page 13
SECTION 4 − SPECIFICATIONS AND INSTALLATION
4-1. Important Information Regarding CE Products (Sold Within The EU)
A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974 − 1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner’s Manuals for all components of the welding circuit for additional EMF exposure
information.
The EMF assessment on this equipment was conducted at 0.5 meter.
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low −
voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.
This equipment complies with IEC 61000-3-12.
ce-emc 4
4-2. Serial Number And Rating Label Location
The serial number and rating information is located on the bottom of the machine. Use the rating labels to determine input power requirements and/or
rated output. CE model rating labels will also display the following symbols: CE, CCC, WEEE, and IEC 60974-1. For future reference, write serial
number in space provided on back cover of this manual.
4-3. Specifications
Input Power
Single-Phase
AC
Rated Welding
Output
IP
Rating
Welding
Amperage
Range
Max
OCV
DC
Amperes In-
put At Rated
Load Output,
50/60Hz,
Single-Phase
KVA @
Duty
Cycle
KW Dimensions Weight
115 Volts
Stick
70A @ 22.8 Volts DC,
100% Duty Cycle
23 20 − 100A
69V
*12-16
17.4 2.0 1.9
H: 9 in.
(229 mm)
W: 5.5 in.
(140 mm)
L: 13.25 in.
(337 mm)
13.7 lb
(6.2 kg)
100A @ 24.0 Volts DC,
35% Duty Cycle
26.4 3.0 3.0
115 Volts TIG
100A @ 14.0 Volts DC,
100% Duty Cycle
23 5 − 150A
69V
*12-16
18.4 2.1 2.1
150A @ 16.0 Volts DC,
30% Duty Cycle
28.0 3.4 3.1
230 Volts
Stick
100A @ 24 Volts DC,
100% Duty Cycle
23 20 − 150A
69V
*12-16
13.1 3.0 2.8
150A @ 26.0 Volts DC,
30% Duty Cycle
21.6 4.9 4.7
230 Volts TIG
100A @ 14.0 Volts DC,
100% Duty Cycle
23 5 − 150A
69V
*12-16
8.3 2.0 1.9
150A @ 16.0 Volts DC,
30% Duty Cycle
14.2 3.2 3.1
*Sense Voltage For Stick And TIG Lift Arc