OM-236 031 Page 17
4-2.
Stick Start Procedure
−
Scratch Start Technique
With Stick selected, start arc as
follows:
1
Electrode
2
Workpiece
3
Arc
Drag electrode across workpiece like
striking a match; lift electrode slightly
after touching work. If arc goes out
electrode was lifted to high. If
electrode sticks to workpiece, use a
quick twist to free it.
1
2
3
4-3. Scratch Start TIG
Ref. WM Marketing
This starting method is not accept-
able for critical applications since
small tungsten particles may be-
come embedded in the workpiece
and contaminate the weld.
Turn gas on.
Quickly drag electrode across
workpiece like striking a match; lift
electrode slightly after touching
work.
If arc goes out electrode was lifted to
high. If electrode sticks to
workpiece, use a quick twist to free
it.
Содержание STR 450
Страница 24: ...OM 236 031 Page 20 SECTION 6 ELECTRICAL DIAGRAMS Figure 6 1 Circuit Diagram For STR 450 ...
Страница 25: ...OM 236 031 Page 21 956142738 A ...
Страница 29: ...Notes Work like a Pro Pros weld and cut safely Read the safety rules at the beginning of this manual ...
Страница 30: ...Notes Work like a Pro Pros weld and cut safely Read the safety rules at the beginning of this manual ...