34
Plug-in chime operation
Press the button on the push button once, it sends a wireless signal to the plug-
in chime which will sound. The sound will stop as soon as the melody ends. For
repeat sounds, press the button again, holding the button will not repeat sound.
1. Melody selection
The plug-in chime provides a choice of 52 different melodies. When the
chime unit is plugged in, press the chime unit select button forwards to play
previous music and backwards to play next music until you hear a chime you
like.
Then hold the volume down button until the LED flashes.
2. Sound volume selection
Press the volume control repeatedly until the desired volume is achieved. 4
levels are available as a circle.
3. Pairing your doorbell
The push button and plug-in chime in your kit have already been paired. If for
some reason pairing is lost, here’s how to pair them again:
Press and hold the volume button for 4 seconds, until the LED indicator lights
up. The plug-in chime enters into pairing status. The press the button on the
push button within 5 seconds to get connection. Once LED indicator on plug-in
chime is flashing fast, pairing is completed. Repeat this operation to get each
required push button connected with same music or same plug-in chime unit.
When above procedure is finished, pairing is quitted automatically.
5. Pairing of two or more push buttons with different music: Press and hold
the volume button for 4 seconds to enter pairing status. Choose one favorite
melody, then press the first push button to pair. Press music button to
change melody, and pair with different push buttons, one by one. When above
procedure is finished, pairing is quitted automatically.
6. Pairing of two or more plug-in chimes with same push button: Press and hold
volume button for 4 seconds on first chime unit to enter pairing status. Press
push button within 5 seconds to get connection. Repeat above operation to
pair push button with the required chime units, one by one.
