33
Installation
Installing battery
Push button uses a 12 V 23 A battery (included). The battery have already been
put in the push button. All you have to do is moving the battery’s insulating piece
away. If the battery runs out, you need to replace the battery as below steps:
1. Lift off the cover by using a screwdriver, remove old battery and Insert a new
battery, matching the correct polarity. Then close the cover.
Installing push button
Mount using either the double-sided adhesive tape or the screws.
1. Mount by sticking it to a wall using the adhesive tape (provided)
Choose an appropriate location for your push button – flat, smooth surfaces
are ideal. Clean the surface with a cleaning wipe and let dry. Stick the double-
faced adhesive tape on the back of the push button. Peel off the other side
of the tape, and attach the push button to the wall by pressing firmly for 30
seconds.
2. Mount with screws
Slide to remove the push button from the mount plate. Screw the mounting
plate to the wall using the screws and plugs provided, the refit the push
button. Note: Test your push button before mounting. Avoid mounting to
metal structures, hidden electricity cables and water pipes.
Installing plug-in chime
1. Select a mounting location that is within 1000 ft range.
2. Plug the chime unit into any regular household socket.
