Milestone pro MP-SC-5T, Руководство пользователя

Страница: 15 / 40

Compact Scaler Switcher (with PoC)
10
The auto-switching mode abides by the following principles:

New input principle
Once detecting a new input signal, MP-SC-5T would switch to this new signal
automatically.

Power rebooting principle
MP-SC-5T offers the function to remember the last displayed signal when rebooting.
Once rebooted, MP-SC-5T will automatically enter auto-switching mode, and then
detect all inputs and memorize their connection status for future rebooting using.
If the last displayed signal is still available, MP-SC-5T will output the signal. If not,
there will be no signal on output devices.

Signal removing principle
Once removing the current display signal, MP-SC-5T will detect all input signals with
priority from INPUT 1 to INPUT 5. It will transfer the signal firstly detected to be
available to output devices.
Notice : Auto-switching function works only when inputting new signal, removing a signal
or power rebooting. With any VGA port set to AV or YPbPr, the system will be not able to
enter in Auto-switching mode.
Operation Examples :

Connect INPUT 2, INPUT 4, and INPUT 5 ports with source devices, select INPUT 4
to outputs.

Press and hold for the front key SOURCE/AUTO for 7 seconds or more to enter in
auto-switching mode.

No signal removing or new input, MP-SC-5T just works in auto-switching mode, and
take no action (Output from INPUT 4)

Connect INPUT 3 with a source device, and then it will choose INPUT 3 to output.

Remove the signal of INPUT 3, MP-SC-5T will detect from INPUT 1 to INPUT 5. And
when it detects that input 2 is available, it will choose INPUT 2 to output.

Cut off the power of MP-SC-5T, then reboot. As MP-SC-5T is in auto-switching mode,
it will choose INPUT 2 to output.
4.1.3 Volume Adjusting
Not in OSD menu, press VOL
– to decrease line volume, VOL + to increase.
Not in OSD menu, press MIC
– to decrease MIC volume, MIC + to increase.
Auto-switching function