Milestone pro MP-SC-5T, Руководство пользователя

Страница: 14 / 40

Compact Scaler Switcher (with PoC)
9
3.5 Application
MP-SC-5T has a good application in various occasions, such as computer realm,
monitoring, conference room, big screen displaying, television education, command &
control center and smart home etc.
4. System Operations
4.1 Operations of Front Panel Buttons
Front panel buttons can be used for output resolution adjusting, switching operations,
software updating, volume adjusting and other operations in menus.
4.1.1 Resolution Adjusting
Resolution supports auto-adjusting and manual-adjusting. Press and hold for
RESO/AUTO button for 7 seconds or more to switch between auto-adjusting/
manual-adjusting mode.
Note:
1. In auto-adjusting mode, MP-SC-5T will choose the resolution of the display device at
the far-end as the preferred resolution.
If you need to choose the resolution of local HDMI display device:

Cut off the power of MP-SC-5T and disconnect MP-SC-5T and HDMI Twisted Pair
PoC Receiver.

Turn on the power of MP-SC-5T.

Gets the resolution of local HDMI output device.

Connect HDMI Twisted Pair PoC Receiver to MP-SC-5T.
2. In auto-switching mode, front panel button control is not available, but IR and RS232
control are able to switch modes.
4.1.2 Switching Operations
Video signals support auto-switching and manual-switching. Press and hold for
SOURCE/AUTO button for 7 seconds or more to enter in auto-switching/
manual-switching mode.
The display result is showed as below:
The display result will be showed for 2 seconds .
IN: HDMI1 AUTO
1280 X 720
IN: HDMI1 MANUAL
1280 X 720