4
Installation of the barrier screen
1. Position the screen so the lock-in levers are at the
top rear of the screen.
2. Hook the bottom of the screen to the bottom edge
of the trim’s front plate as indicated.
3. Lift the levers as indicated and push the screen
against the trim.
Lock-in levers on top rear
Front view
Detail:
Levers’ hooks
shown
hooked into
the slots of
the trim’s
top return
edge
4. While holding the screen, rotate the lock-in levers
so that they hook onto the trim, then slide the
levers inwards to secure the screen to the trim as
indicated.
Note:
The levers hook in the slots of trim’s top
return edge.
5. Verify that the screen is properly hooked to the trim
and secure.
Removing the screen
The barrier screen will need to be removed to access
the fi replace controls or for maintenance.
To remove the screen, slide the lock-in levers at the top
of the screen outwards and up so they disengage from
the trim, then lift the screen out.