4003739-02
L2 S
ERIES
© Copyright Miles Industries Ltd., 2013.
1750 Linear 5-1/4”
Surround Kit
Installation Instructions
Approved for use with
Valor Models 1700 Heaters ONLY
The 1750 Linear 5-1/4” Surround Kit is designed to be
used on the Linear L2 1700 Valor heater.
The application of this kit does not affect the venting
capabilities or method of preparation of the 1700 heater
as described in the 1700 heater installation manual.
This trim fi ts fl at against the cement board with the ability
to tuck additional non-combustible materials up to 1/2
inch thickness behind the trim.
Replacing the side panels on the trim allow non-
combustible material thickness to be increased to 1 inch.
Overview
(Fireplace engines sold separately)
Trim size
Non-combustible
cement board
Barrier screen
LH Trim panel
RH Trim panel
LH Side door
RH Side
door
Trim
Plinth
24-5/8” (625 mm)
59-1/2” (1511 mm)
Thickness
1-3/8” (35 mm)
Note:
This kit must be installed
by a qualifi ed installer, service
agency or gas supplier. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
I N S TA L L E R
Leave this manual
with the appliance.
C O N S U M E R
Retain this manual
for future reference.
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.