MiLAN MIL-P3720, Быстрая установка

Страница: 20 / 32

16
M M I I L L - - P P 3 3 7 7 2 2 0 0 Q Q u u i i c c k k I I n n s s t t a a l l l l G G u u i i d d e e
Conf
iguration
NetW
are
Setup for NetWare
NDPS (IP)
Note: Before you create a printer in NDPS for the print server, make sure that
you have assigned an IP address for the print server. (The print server
must have firmware 3.5 or above).
1. In NetWare Administrator, select the container where you want the
printer object to reside.
2. Select “Create” from the object menu, and select “NDPS printer”
from the object dialog box.
3. Enter a name of your choice in the NDPS printer name field, select
the source of the Printer Agent at the source field, and press “Create”.
4. Confirm the Printer Agent Name, select the NDPS manager, and
choose the Novell gateway at the Gateway Types window. Click on
“Next”.
5. Configure as follows:
6. Novell DPS-- select printer type as “None”, Click “OK”.
7. Connection type--- (remote LPR on IP), click “Next”.
8. Host Address-- Enter the IP address of the print server or the
Hostname as defined in your DNS server.
9. Printer Name--- Enter the pre-defined queue name for the print
server in lower case letters; click “Finish”.
10.Printer Driver--- Choose “None” from the top of each list, for each
client operating system.
11.Click “Continue”. The main browser window appears with your
new controlled access printer listed.
Workstation users can now select the printer and print to it.
Bindery
Installing the print server in a 3.x bindery mode entails:
1. Creating a print server and print queue objects on the NetWare
server, then binding the two together.
2. Creating a config. file that describes the file server and print queue