Milagrow AguaBot7.0, Руководство по эксплуатации

Страница: 19 / 22

Installation and removal
of the suction inlet
1. Installation of the suction inlet:
2. Removal of the suction inlet:
Installation of the suction inlet:
1.As shown in Fig. 1, pick the U shaped clip each side of the sweeping bracket simultaneously
with both index fingers to remove sweeping bracket.
As shown in Fig. 2, pull up the left end of the ONE COVER ALL brush assembly with a hand to
take out the assembly
As shown in Fig.3, install the suction inlet onto the cleaner, to get only pure vacuum function
(Fig. 4).
Follow the same steps 1 and 3 for removal of the Suction Inlet.