Configuration
EoSens GE Camera Manual
6.2.3 Invert readout in x- and or y-direction, commands: ReverseX, ReverseY
Commands:
ReverseX, ReverseY
Description:
This feature allows to flip the frame in x- and or y-direction.
Remark:
This mode can not be combined with Decimation mode or MultiROI mode.
6.2.4 DecimationXY mode (Subsampling), command: DecimationXY
Command:
DecimationXY
off ; on
Description:
With this feature enabled the sensor skips every other row and column.
Therefore the maximum width is 640 pixel and the maximum height is 512
pixel. The advantage is that a lens with the same focal distance can cover
the identical image size but with a higher framerate.
Note:
A ROI of 640x512 covers the whole sensor area and equals the repro-
duction scale of 1280x1024 in normal mode. Switching on/off this mode
halves/doubles the output image size.
Limitation:
The ROI x-start position should be zero because else the internal FPN
correction does not work correct. If a x-start position >0 is needed the
internal FPN correction should be turned off. If necessary a correction
must be done in software.
Remark:
This mode can not be combined with ReverseX/Y mode or MultiROI
mode.
original used pixels output
