Mikrotron Cube5 C, Инструкция по эксплуатации, Страница: 56 / 85

5.7.2.2.1 Recording while trigger is active
As long as the trigger is active, recording will proceed. When the trigger gets inactive
before the image buffer is full, the camera is waiting for the next trigger. Not until the
end of the buffer is reached the recording ends (or if the recording was aborted before
by clicking on the “stop” button or pressing the key F12).
The trigger may be:
1. the camera’s trigger switch
2. an external trigger signal connected with the camera’s trigger input, provided
that „Trigger With External Signal“ in „Record Settings” is activated. The active
edge or the active state of the signal may be selected in the menu “Camera
Setup” (Selecting resolution, speed, gain, trigger, sync, ARM and white balance)
3. changings of the contents in a specific part of the actual recorded image if Im-
ageBLITZ is used, i.e. “Trigger With ImageBLITZ” is activated (see chapter
5.7.3.1.2 “ImageBLITZ – optional” for details of ImageBLITZ).
With this trigger setting, the active state of the trigger is essential, not the edge.
MotionBLITZ Cube User Manual Ver. 1.8.0 56