Page 20
The microcontroller can be
also programmed with
ICD2
®
or ICD3
®
programmer
. These
programmers connects with
mikromedia board via
ICD2
CONNECTOR BOARD
.
Programming with
ICD2
®
or ICD3
®
programmer
In order to enable the ICD2
®
and ICD3
®
programmers to be connected to the development system, it is
necessary to provide an appropriate connector such as the
ICD2 CONNECTOR BOARD
. This connector should
be first soldered on the CN5 connector. Then you should plug the ICD2
®
or ICD3
®
programmer into it, Figure 3-14.
Figure 3-15:
Connecting ICD2
®
or ICD3
®
programmer
