Page 22
4. Reset buttons
Figure 4-2: Frontal reset button
Figure 4-1: Reset button located at the backside of the board
Board is equipped with a reset button, which is
located at the top of the front side (
Figure 4-2
). If
you want to reset the circuit, press the reset button. It
will generate a low voltage level on the microcontroller
reset pin (input). In addition, a reset can be externally
provided through pin 27 on side headers (
Figure 4-3
).
You can also solder an additional
reset button on the appropriate place
at the back side of the board,
Figure 4-1
.
note
