Page 20
Page 21
5. Prototyping area
Proto area
allows you to
expand your Ready for XMEGA board
with additional functionalities. That can be
done by placing your additional components on
available prototyping area. Pads are arranged in standard
100mils distance form factor. There are 20 connected lines on
both halves of the breadboard area, and each line consists of 5 soldering
pads, which are on the same voltage level (connected to each other) .
Figure 5-1:
Proto area usage
LD1
GREEN
LD2
RED
LD3
YELLOW
R1
R2
R3
PJ
0
PJ
1
PJ
2
DATA BUS
Figure 5-2:
schematics
of three LEDs
connected to
microcontroller
pins as shown
in Figure 5-1
