Page 12
Page 13
Programming with mikroBootloader
You can program the microcontroller with bootloader which is
preprogrammed into the device by default. To transfer .hex file
from a PC to MCU you need bootloader software (
mikroBootloader
USB HID
) which can be downloaded from:
After software is downloaded, unrar it to a desired location, and
start mikroBootloader USB HID software.
http://www.mikroe.com/eng/downloads/get/1271/
mikrobootloader_xmega_v101.zip
note
Figure 3-2: mikroBootloader window
mikroBootloader software
01
When you start mikroBootloader software, a window
shown on
Figure 3-2
should appear.
Before starting mikroBootloader software, connect Ready for
XMEGA with a PC using USB cable provided with the package
This version of mikroBootloader is specialized
for ATxmega128A1 chip.
note
