1
Development System EasydsPIC6
MikroElektronika
page
11.0. Serial EEPROM Module
EEPROM (Electrically Erasable Programmable Read-Only Memory) is a built-in memory module used to store data that should be
saved when the power supply goes off. The 24AA01 circuit can store up to 1Kbit data and uses serial I
2
C module to communicate with
the microcontroller via pins RF2 and RF3. In order to enable connection between the EEPROM module and the microcontroller, it is
necessary to set switches 1 and 2 on the DIP switch SW9 to ON position.
Figure 11-2
: Serial EEPROM module and microcontroller connection schematic
Serial EEPROM is connected to the microcontroller via pins RF2 and RF3
Figure 11-1
: EEPROM module
1Kbit EEPROM module used for
storing small amount of data
