dsPICPRO User
’
s Manual
18
page
M I K R O E L E K T R O N I K A S O F T W A R E A N D H A R D W A R E S O L U T I O N S F O R T H E E M B E D D E D W O R L D
dsPICPRO
2.0
USB
MikroElektronika
Development
tools
G
R
A
P
H
IC
LL
C
D
11
2
8
X
6
4
When GLCD is on place you can
adjust contrast through the hole
from other side of development
board.
GRAPHIC LCD
The Graphic LCD (GLCD) allows advanced visual messages to be displayed.
While a character LCD can display only alphanumeric characters, a GLCD can be
used to display messages in the form of drawings and bitmaps. The most common-
ly used graphic LCD has a screen resolution of 128x64 pixels. Before a GLCD is
connected, the user needs to set jumper J23 (Fig. 18) to the right-hand position. The
GLCD’s contrast can be adjusted using potentiometer P1. Jumper J23 and poten-
tiometer P3 are placed on the area of the GLCD. When GLCD is on place you can
adjust contrast through the hole from other side of development board.
GLCD
Figure 18.
