Mikroe EasyPIC PRO v8, Руководство пользователя

Страница: 20 / 32

P A G E 20
E a s y P I C P R O v 8 M a n u a l
2x20 display connector
EasyPIC PRO v8 development board features a standardized 2x20-pin display
connector
(1) . This connector consists of the 8080 parallel interface, offering
support for displays with up to 8 bits per color (up to 24-bit mode, 16 million
colors). Besides the 8080 interface, this connector also contains pins related to
touch panel controller, interfaced over dedicated I2C bus lines. The power supply

Make sure to turn off the power supply before placing the display
module on the board. Otherwise, the display module or the board can
be permanently damaged.
rails are also routed to this connector. Using the standardized pinout ensures
compatibility with the existing (i.e. TFT Board Capacitive line of displays), as well
as the future versions of display boards.More information can be found at
www.mikroe.com/accessories/displays/tft-displays
1
Figure 9: 2x20-pin board connector view