MIKOTERM TK-24 12kW, Инструкция по установке, использованию и техническому обслуживанию

Страница: 5 / 38

Data about device
2. Data about device
These instructions consist of important information about
safety and professional installation, commissioning and
maintenance of the boiler.
These instructions are aimed to installers who have
knowledge to work with heating installations based on their
professionalism and experience.
2.4 Work instruction
When working with heating installations please respect the
following instructions:

Boiler should work in the area with maximum temperature
Of 80°C, with minimum pressure of 0.5 bars and
maximum pressure 3 bars including regular
pressure control.
2.1 Typology
This manual relates to the following type:
TK-24 6 ÷ 45 kW
2.2.1 Statement on conformity
We hereby declare that devices are tested in
accordance with directives 2006/95/EC (low voltage
directive LVD and 2004/108/EC - directive on electric
magnetic compatibility EMC)
2.2.2 Regular use
The boiler must be used only for water heating for the heating
system and for indirect preparation of hot water. In order to
secure regular use it is necessary to comply with instruction
manual, data on the manufacturer plate and technical data.

Boiler must be handled only by adults familiar with
instructions and working modus for boiler.

Keep the safety valve open

Combustible things must not be put on the boiler or
near it (within safety distance).

Surface of the boiler can be cleaned only by non-combustible
cleansers.

Do not keep combustible things in the room for the boiler
mounting (e.g. petroleum, oil).

No one lid must open during the work process.

Keep safe distance according to valid local regulations
2.3 Installation instructions
2.5
Inhibitors and anti-freeze products
Use only original manufacturer’s spare parts or spare
parts approved by the manufacturer. For damage
occurred due to spare parts not supplied by the
manufacturer shall not be born any responsibility.
Please follow up the following instructions when mounting heating
installations:
• Comply with valid construction regulations.
• Comply with regulations and norms on safety-
technical equipment for heating installations.
It is forbidden to use anti-freezing products or inhibitors. If
not possible to avoid use of anti-freezing products there should
be applied only products allowed for heating installations.
Use of anti-freezing products:

It reduces lifetime of the boiler and its
parts.

It reduces heat transmission.
• Alternations at the site in accordance with valid
regulations.



