- Provide a professional examination of the electrical installation before installing the device.
- All electrical operations must be carried out by a person authorized to carry out electrical operations, according to the
relevant regulations.
- Ensure that putting into operation, as well as maintenance and repairs are carried out by an authorized servi ce.
- The boiler can only be used for heating the heating water and for the indirect preparation of hot water. In order to ensure proper
use, it is necessary to comply with operating instructions, data on the factory tile, and technical data.
Danger due to not respecting one's own safety in case of an emergency, eg. in the event of fire
- Never expose yourself to life threatening situations. Your own safety is always a priority.
Damage caused by wrong handling
- Handling errors can lead to injury of persons and/or damage to the installation.
-
Make sure that only people who know how to handle properly the device have access to it.
- Installation and putting into operation, as well as maintenance and repair, must only be carried out by an
authorized service centre with appropriate authorization for electrical works.
Installation and putting into operation
-
Leave the installation of the device only to an authorized service centre.
-
Install the device only in a room where freezing cannot occur,
without high concentration of dust, e.g. from grinding, or
high concentration of soot.
-
Always start the boiler only if the installation is at an appropriate pressure and the operating pressure is correct. Do not close the
safety valves in any case in order to avoid damage caused by too high pressure. During heating, the water can leak on the
safety valve of the hot water circuit and hot water pipe.
-
Do not store flammable materials or liquids near the device
-
Keep a safe distance according to applicable regulations
Life-threathening danger from electric shock
- Before all works: disconnect the electric power supply. Secure youself from accidental turning on.
- Do not install this device in wet rooms.
Inspection / maintenance
- The electrical equipment of the mobile electrical heating unit must be inspected periodically. Loose connections and
damaged cables as well as wires must be corrected/replaced immediately.
Recommendation for the user: Make a
a maintenance contract with an authorized service centre, that will perform annual maintenance and control checks
Original spare parts
-
No liability can be claimed for damages arising because of the spare parts which are not supplied by the manufacturer.
-
Use only original spare parts.
Material damages from freezing
- In the event of a risk of freezing, drain the water from the boiler, tank and pipes of the heating system. The risk of freezing does
not exist only when the enter installation is dry.
Special risks -
Danger of Burns and Scalds
- Only experts with special knowledge and experience in heating technology may work on heating equipment
Special risks -
Risk of Stumbling or Falling
- There is a risk of stumbling and falling due to the connection hoses, pipes and connection cables connected to the
mobile electrical heating unit.
- Place the connection hoses, pipes and connection cables in such a way that they no longer present a risk. If this is not
possible, mark the floor accordingly.
- There is also a risk of slipping, stumbling and falling due to dirt, expelled water and objects lying in proximity.
-
Clean the floor from dirt and expelled water after any work on the mobile electrical heating unit has been completed.
- Place objects lying in proximity in their places or aside.
Explanation of symbols and instructions for safe work
