7.5.2
GRAPHIC DISPLAY
–
If the submenu ''PROGRAM STATUS'' determined the current status of the program in progress graphs
(GRAPHIC DISPLAY), pressing
''OK''
until the flashing ''GRAPHIC DISPLAY''opens the following screen is displayed:
image 58
On this view (image 58), you can see a complete program that is executed, the number of current days is blinking, and dot below the
graphics that also marks the current day that is underway to make it easier to gain insight into the part of the program is executed and a
part of the program, which has yet to is executed. Set value temperature for a day program that is underway is displayed under a number
of days is in progress
7.6
STOP HEATING PROGRAM
-
In this menu item have possibility stopping the program that is in progress, therefore this
menu is available only if is some screed drying program activated. In this case, it is a program 3 - ''INDIVIDUAL HEATING''. If it is
necessary, for some reason, to stop the program for drying screed, which is in progress, in the main menu (image 24) choose the option
''STOP HEATING PROGRAM'', and the display will show the following view (image 59a):
image
59a
image 59b
Option which blink after entering this submenu is ''NO'' to avoid accidental interruption of the program. By pressing the
''+''
or
''-''
select ''YES'' (image 59b). By briefly pressing the
''OK''
(above which is the "SELECT" inscription),
confirms irrevocably stop the program
in progress, the display shows a notification that the program is terminated (image 60), with time and date of termination.
image
60
image
61
By briefly pressing the
''SET''
button (above which is the "BACK" inscription), to return to the initial display, setpoint power of boiler is
set to ''0'' (image 61). In order to continue the work of the boiler it is necessary to carry out the new settings.
Screed drying programs
