7.3
PROGRAM SETTINGS
–
If in Basic menu (image 31), using the '
'-''
and
''+''
select this submenu, you can see the following
screen (image 39):
image 39
In this sub-menu (image 39) you can reviewed and adjusted screed drying programs. Program 1: ''FUNCTION HEATING'' (image 40)
and program 2: ''FUNCT. & PROOF HEATING'' (image 41 / page 15) are set at the factory and are unchangeable.
Program 3 ''INDIVIDUAL HEATING'' (image 42 / page 16) is without factory setting and it is necessary to adjusted according to user
needs completely before starting program.
7.3.1
FUNCTION HEATING
image 40
Program 1 ''FUNCTION HEATING'' (image 40) is set at the factory and
can not be changed
. Duration of the program is 7 days.
Factory setting:
-The first 3 days keep the temperature of 25 °C,
-From 4th to 7th days, including 7th day maintains 55 °C.
Using the button
''OK''
can be viewed day-by-day program. Every key press
''OK''
means the transition to the next day program, whereby
the moving point on the graph that indicates the day which is being viewed. Also, in the right part of the display is changed number of the
day and below them the water outlet temperature for the daily program.
-After the expiry of 7th days program is completed, circulation pump and heaters are turned off, and information
of the successful execution of the program is on the screen.
To enter the main menu press
''OK''
Screed drying programs
