background image

䕿䚷

䚷 䞉

DANGER

WARNING

䕿䚷

䚷 䞉

CAUTION

䕿䚷

䚷䚷 䞉
䚷䚷 䞉

䚷䚷 䞉

䚷䚷 䞉

㻌㻌㻌㻌㻌䞉

Check of earth leakage braker.

Because this product is double insulation structure, the setting of 

earth leakage braker is exempted by a law. But this machine is 

very dangerous because it's used at a juicy place.Use electric 

leakage braker by all means.

Make sure the switch is turned off.

If the machine is plugged without knowing that the switch turned 

on, the machine starts to operate unexpectedly, causing an 

accident. The switch is turned on when it pulled trigger, and 

turned off when separated trigger.

Always check that the switch can be turned on and off by pulling 

and separating of the trigger.

䚷䚷

䚷䚷 䞉

WARNING

WARNING

䕿䚷

䚷 䞉

Check the assembly of motor and flexible hose.

Check on whether the LOCK NUT of the flexible hose is 

completely tightened in a motor. (MGX type is the left screw.)

Check of the plug and power outlet.

If you experience looseness when the plug is inserted into the 

outlet, or if the plug comes off from the outlet, you need some 

repair.

If used without repair, overheating might occur, resulting in an 

accident.

(Connection) Extension cord

Use an (connection) extension cord that is not damaged.

If the power source is far away from the machine and you need 

an extension cord, use the one with sufficient size that allows 

the flow of necessary current, and try to make the length of the 

cord as short as possible for maximum efficiency and trouble 

free operation of the machine.

Use the extension cabtyre cord of thickness more than core line 

1.25 mm  .

As the cord gets longer, the voltage becomes lowered in 

proportion to the length, which results in poor motor starting 

operation and lowering of output.(MGX type can extend 

approximately 50m at 2 mm  .)

For outdoor use, use cabtyre cord or cabtyre cable connection 

(extension) cord.

4-3  Cautions during work


䕿䚷

WARNING

Always be alert and pay careful attention to your work.

When using the vibrator, work very carefully with careful attention 

to the operation method, work method and the surrounding 

condition.

Use your common sense.

When you are tired, do not use the machine.



䕿䚷

DANGER

Avoid sudden start.

Do not carry the machine with the switch turned on while 

connected to the power source.

Before plugging, make sure that the switch is turned off.

DANGER

䕿䚷
䕿䚷
䕿䚷

CAUTION

Do not handle the cord carelessly.

Do not pull the cord when trying to unplug it.

Do not use the machine by hanging it with the cord.

Do not put the cord near heat, oil or sharp corner.

Do not use the vibrator that cannot be started or stopped 

by the operation of the switch.

Содержание MGX-23













Отзывы: