The canopy of the LOGO 480 is mounted via four attachment points.
The two attachment points in the front ensure that the canopy sits well
on the chassis during flight. In the back, the canopy is attached by two
rubber grommets.
Important note: A special feature of the Logo 480 canopy ist that it the
back part is fully closed. Take your time when mounting and dismounting
the canopy. Use proper care when sliding the canopy over the rotor
shaft, to avoid damage on the surface of the canopy.
Before each flight, check that the canopy sits securely. If the canopy sits
too lose, this can deteriorate the flight performance of the helicopter. If
the canopy becomes lose during flight, the helicopter will crash.
This canopy is 100% hand-made. Small irregularities in the surface, the
airbrush design or color are normal. They do not constitute a reason for
complaint.
For extra protection of the canopy, you may mount
edge protector, item no. 4594. You may need to
enlarge the cut-outs.
Prior to the first flight, check the direction of
the main rotor and the tail rotor. Both must
turn clockwise.
Manual LOGO 480 - ©Mikado Model Helicopters GmbH -2013- Page 15
13 Canopy and Overview
