Mikado LOGO 10 3D, Руководство пользователя

Страница: 54 / 66

Manual LOGO 10 3D Page 54 ©Mikado Modellhubschrauber
0°
0°
0°
16 RC Programming
Pitch Values
Maximum Pitch Minimum Pitch 0° Pitch
If you are an experienced pilot and plan on flying inverted, select the 3D settings:
For setting the respective pitch values, please use a pitch gauge. The values for minimum and maximum
can be specified in the menus of the transmitter.
Application Low Pitch Stick Centered High. Pitch
3D
– 10º bis – 12º 0º 11º to 12º
Application Low Pitch Hovering (Stick Centered) High Pitch
Standard
– 3º 7º to 8º 11º to 12º
The center position of the sticks in your R/C radio corresponds to 0° pitch of the rotor blades. At 0° pitch,
all levers (servo arms, washout lever, mixing arms) should be in horizontal position. At 0° pitch, the
swashplate is in center position, allowing the same travel in upward (positive pitch) and downward
(negative pitch) direction. This setting results in a linear pitch curve, which is ideal for 3D-style flying.
Pilots who wish to fly with less negative pitch should reduce the pitch curve to approx. -3° pitch. Note that
with this latter set-up the sticks are not at center position for hovering.