Mikado LOGO 10 3D, Руководство пользователя

Страница: 49 / 66

Manual LOGO 10 3D Page 49 ©Mikado Modellhubschrauber
#2478
15 RC Installation
15.1 Receiver, Gyro, Speed Controller
Important:
1) Use only high-quality receivers,
preferably the most up-to-date PCM
receivers.
Lower-quality receivers may lead to
disturbances or motor shut-offs.
2) Attach the antenna wire in such a
way that it cannot touch any other
wires or any parts of the helicopter
except for the antenna leads in the
landing bows where the antenna is
meant to be attached.
3) The ser vo
wire of the speed controller must be
placed in such a way that it is isolated
from any other wires.
4) Do not place any wires in the
neighborhood of the tooth belt.
5) Do not use braces made from metal
or any other metal parts for attaching
the gyro, horizontal stabilizer or tail
boom brace on the tail boom.
6) If you are using a separate BEC,
attach it on the bottom side of the
mainframe and lead the live wire to
the receiver in such a way that it
cannot touch any other wires.