Mikado LOGO 10 3D, Руководство пользователя

Страница: 26 / 66

Manual LOGO 10 3D Page 26 ©Mikado Modellhubschrauber
2x 4x11x5mm #2503
#3097
8 Canopy
8.1 Mounting
Bag 1
The canopy does not yet have any
holes for attaching it to the helicop-
ter. In order to fit the canopy properly
to your model, please proceed as fol-
lows: First, use rod no. 743 for mar-
king where the holes will be cut out.
Push the rod through the mainframe,
as shown in the picture. Then positi-
on the canopy exactly like you want
it to be attached to your helicopter.
The lower end of the canopy will al-
most touch the tail boom. Close the
canopy with tape, letting the two hal-
ves overlap slightly.
Now apply light pressure to the
canopy in the area of the two ends of
the rod. In this way you will obtain
round marks just where you need to
drill the holes for attaching the cano-
py. Drill two holes with 8mm diame-
ter each. After drilling, place a cano-
py fixing ring no. 2503 into each hole.