25
2. Select WLAN check box, to open Wi-Fi. The phone will
automatically scan can be used a wireless network.
3. Click on the Wi-Fi settings. Then WLAN network will
display a list of WLAN to find the network of the name and
security Settings (open network or with WEP, WPA/WPA2
encryption). If the opening set of WLAN network notice, to
find a cell phone in the open wireless network can be used
in the status bar shows the icon( ).
4. Touch one of the WLAN network to connection. When you
select open network, mobile phone will be connected to the
network. If selected is WEP, WPA/WPA2 encryption network,
it must first corresponding input password, and then the
touch connection.
NOTICE: When the phone is connected to a wireless
network, the status bar will display the WLAN icon ( ),
and displays the approximate signal strength (light up
the number of strip).If touch mobile phone at present the
connected to a wireless network, will display the name of
the state, WLAN network, speed, signal strength, safety
information and IP address. If you want to remove phone
wireless networks set, please touch this window on the
"don't save". If you want to connect to the network, you
must enter again these Settings.
Unless you choose not to save network, or the next mobile
phone to connect to previously had connected encryption
wireless network, will not have to enter a password
accordingly. The network will search by WLAN, also is the
mobile phone does not need to perform additional steps can
