Mighty Seven DI-1015, Руководство пользователя

Страница: 22 / 32

21
NOTICE: The lock-on feature functions only for
pressures up to 40 PSI, 2.75 BAR, and 2.80
KG/CM 2. The cordless inflator is designed
to automatically stop at 40 PSI 2.75 BAR,
or 2.80 KG/CM 2for all lock-on inflating
operations.
NOTICE: If the setting pressure is greater
than 40 PSI (>40 PSI, 2.7 5BAR), the inflator
will automatically shut off when the pressure
reaches 40 PSI (2.75 BAR, or 2.80 KG/CM2).
To activate the inflator, release the lock-
on button and depress it again to continue
inflation.
NOTICE: If the battery pack is disconnected
during inflation, the inflator will not resume
inflation when the battery pack is reinstalled.
When the battery pack is reinstalled, slide the
ON/OFF switch to the “OFF” position, and then
push it to “ON”.
18. ADAPTER STORAGE
When not in use, adapters provided with the
inflator (except those that come with the high
volume adapter) can be placed in the storage
area located on the base.
19. DIGITAL GAUGE
The digital gauge on the inflator is
multifunctional. It serves as a pressure gauge,
monitors the amount of pressure being applied
to the item being inflated, and can change air-
pressure measurement units from PSI to BAR
to KG/CM2.
To turn the digital gauge ON, slide the
ON/OFF switch forward to the “ON”
position.
NOTICE: Make sure that the digital gauge is
set at 0 before use. If the gauge reads “Err
press the (-) and the (+) button at the same
time and hold them down for about 3 seconds
until the gauge calibrates to be 0.
20. To Use the Pressure Gauge Feature
1) Turn digital gauge on by pushing the ON/
OFF switch forward to the “ON” position.
2) Place the air chuck over the valve stem and
press it down. The pressure will display on
the gauge.
During inflation, the air pressure will
appear on the gauge as the item is
being inflated.
Pressure Gauge
- Button
+ Button
Air pressure unit