Mighty Seven DI-1015, Руководство пользователя

Страница: 17 / 32

16
OPERATION
1. LOW-BATTERY CAPACITY INDICATOR
If the FuelGauge shines red when the lock-on
button on the inflator is depressed, the battery
pack power has run out, and the battery pack
should be recharged. Unlike other battery-pack
types, Lithium-Ion battery packs deliver fade-
free power for their entire run time. The tool will
not experience a slow, gradual loss of power
as you work. To signal that the battery pack
is at the end of its run time and needs to be
charged, the power to the tool will drop quickly.
NOTICE: The LED may also flash due to an
overload or high temperature (see BATTERY
PROTECTION).
2. BATTERY PROTECTION
To protect the battery from damage and prolong
its life, the battery pack circuitry will turn off the
battery pack if it becomes overloaded or if the
temperature becomes too high during use. This
may happen in extremely high torque, binding,
and stalling situations. This intelligent system
will shut down your battery pack if its operating
temperature exceeds 176°F (80°C) and will
begin normal operation when it returns to
approximately 122°F (50°C). The battery pack
will begin normal operation when it cools down.
NOTICE: A significantly reduced run time after
fully charging the battery pack indicates that
the battery is near the end of its usable life and
must be replaced.
3. COLD WEATHER OPERATION
This Lithium-Ion battery pack will provide
optimal performance in temperatures between
32°F (0°C) and 104°F (40°C). When the battery
pack is very cold, it may “pulse” for the first
minute of use to warm itself. Put the battery pack
on a tool and use the tool in a light application.
After about a minute, the battery pack will have
warmed itself and will operate normally
.
4. WHEN TO CHARGE THE BATTERY PACK
It is not necessary to run down the battery pack
charge before recharging. The Lithium-Ion
battery can be charged
at any time and will
not develop a “memory” when charged
after only a partial discharge.
Remove the battery pack from the tool when it
is convenient for you and your job. “Top off” the
battery pack charge by charging it for a time
before starting a big job or long period of use.
Due to Lithium-Ion fade-free properties, the
only time it is necessary to charge the Lithium-
Ion battery pack is when the pack has reached
the end of its charge. To signal the end of
charge, power to the tool will drop quickly.
Charge the battery pack as needed.
5. BATTERY CHARGING
Please Indoor charging.
Use only the battery chargers listed on
the accessories page. Only these battery
chargers are matched to the lithium-ion battery
of your power tool.
The battery is supplied partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before
using your power tool for the first time.
The lithium-ion battery can be charged at
any time without reducing its service life.
Interrupting the charging procedure does not
damage the battery.
WARNING: Do not continue to press the
trigger switch after the machine has been
automatically switched off. The battery can
be damaged.
The battery is equipped with an NTC
temperature control which allows charging only
within a temperature range of between 5
℃
and
40
℃
. A long battery service life is achieved in
this manner.
Observe the notes for disposal.