18
TO DETACH BATTERY PACK
1) Depress the battery-release buttons located
on the sides of the battery pack to release
the battery pack.
2) Pull the battery pack out and remove it from
the tool.
NOTICE:
The inflator will not automatically
restart when the battery pack is reinstalled after
detachment from the tool. Turn the tool OFF
and then turn it ON again. Inflation will resume
7. TO STORE THE HOSE AND AIR-CHUCK
1) Guide the hose into its storage groove
around the circumference of the tool.
2) Fit the air chuck over the tab in the storage
compartment to secure it in place.
Air Chuck
8. INFLATING WITH THE AIR HOSE
WARNING:
The inflator is capable of
inflating to 200 PSI, 13.7 BAR, or 14KG/CM
max. To avoid over inflation, carefully follow
the instructions on items to be inflated. Never
exceed recommended pressures. Use only
recommended air handling parts acceptable for
pressures not less than 200 PSI.
WARNING:
Improperly attached hoses or
adapters can become detached under pressure
and cause serious injury.
TO LOCK
AIR HOSE
AIR CHUCK
VALVE STEM
AIR CHUCK
CLAMP
TO UNLOCK
NOTICE:
Possible air leaks can cause faulty
pressure readings. Make sure all connections
are tightly secured.
NOTICE:
The inflator is not designed to inflate
large volume items such as boats, pools,
rafts, large air beds, etc. It is not designed for
commercial applications.
The air chuck on the air hose can be used
without adapters to inflate tires or other items
that have a valve stems that fit the air chuck
opening.
1) Raise the air-chuck clamp.
2) Place the air chuck on valve stem.
3) Push the air chuck down so that the threaded
section of the valve stem is inside the air
chuck.
4) Clamp the the air chuck onto the valve stem
by pressing air-chuck clamp down until it
stops or is parallel to the air hose.
5) Slide the ON/OFF Switch to ON.
6) Press the Lock-On button to start inflation.
7) Press the Lock-On button again to stop
inflation.
9. INFLATING WITH THE AIR HOSE AND
ADAPTERS
The air hose can be used with the provided
adapters to inflate a variety of items.
10. Installing/Removing Adapters
1) Remove battery pack from the inflator.
2) Raise the air chuck clamp.
3) Insert the adapter into the chuck until it
Содержание DI-1015
