Mighty Mule MM272 Скачать руководство пользователя страница 3

Страница: 3 / 44

WARNING

This equipment meets Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has

hazards associated with its use and therefore by installing this product the installer and user accept

full responsibility for following and noting the installation and safety instructions. Failure to follow

installation and safety instructions can result in hazards developing due to improper assembly.
You agree to properly install this product and that if you fail to do so Nortek Security & Control, LLC,

shall in no event be liable for direct, indirect, incidental, special or consequential damages or loss of

profits whether based in contract tort or any other legal theory during the course of the warranty or at

any time thereafter.
The installer and/or user agree to assume responsibility for all liability and use of this product releasing

Nortek Security & Control, LLC, from any and all liability. If you are not in agreement with this

disclaimer or do not feel capable of properly following all installation and safety instructions you may

return this product for full replacement value.

READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY

before attempting to install and

use this automatic gate operator. This gate operator produces a high level of force. Stay clear of the unit

while it is operating and exercise caution at all times.

ALL AUTOMATIC GATE OPERATORS ARE INTENDED FOR USE ON VEHICULAR GATES
ONLY.

Содержание MM272













































Результаты поиска

Содержание MM272

Отзывы:

Похожие инструкции для MM272

Бренды по названию

Популярные бренды

Mighty Mule MM272, Руководство по установке

Результаты поиска

Содержание MM272

Отзывы:

Похожие инструкции для MM272

Бренды по названию

Популярные бренды