Mighty Mule MM272, Руководство по установке

Страница: 18 / 44

14
MM272 Installation Instructions
Tools and Materials
Items Not Included
7/16” Bit
5/16” Bit
Drill
Pliers
Level
Clamps
Adjustable
Wrench
Pen
Center
Punch
Hammer
Tape
Measure
Small
Flat Head
Philips Head
Screwdriver
Flat Head
Screwdriver
Wire
Stripper
Hack Saw
1/2”
wrench
9/16”
wrench
● 12 Volt automotive or marine battery and a
weather proof case.
● Low voltage wire will be needed to run from
the transformer to the control box; length
depends upon the distance between the
transformer power supply and the control box.
See
Connect the Transformer
on page 22 ,
and the accessory catalog.
● PVC conduit.
● If your gate is more than 1000' away from an
AC power source you will need to use at least
one Mighty Mule solar panel to trickle charge
the battery. See the accessory catalog (Do not
use both transformer and solar).
● If you have thin-walled tube or panel gates, see
Recommended Reinforcement Examples after
Step 3 of “Mounting Operator to Gate”.
● Depending on the type of gate, a horizontal
cross member or mounting plate may be
needed to mount the front of the operator and
gate bracket to the gate. See Gate Bracket
Mounting Examples after Step 3 of “Gate
Operator Installation.”
● Surge protection for transformer.
● Some types of installations require u-bolts.
● Additional washers or a metal plate may be
needed for wooden post.
● Weatherproof cover for outdoor outlet and
transformer.
● If the post is larger than 6”, bolts longer than
8” are needed.