MIGEL GBL 1000, Руководство пользователя

Страница: 11 / 12

5
jar in position, rotate the knob to “0” position, and then start to use the
product;
Overheat protection – If the product overload working for long time, the
thermal limiter will stop the product to protect the motor not overheat. If
thermal limiter operate, please reduce the load of blending jar, and wait for
almost 30 min to let the motor cool down, and then use the product again.
If LED light still flashing, but product still not work, wait more 10 to 20 min.
Overcurrent protection – If blending very hard food (or very big food)
incorrectly, the blade may block, the current limiter will stop the product.
If current limiter operate, please switch off the product and remove the
very hard or very big food, and then use the product again.
Cleaning & Maintenance
1. Before cleaning, make sure the power switch and speed regulator is in
“0” position, remove the plug from the supply main.
2. Cleaning the blending jar can use the water, but not chemical agent or
other liquid.
3. Cleaning motor base only use the dry cloth, never use wet cloth clean
the motor base, or immerse the motor base into water.
4. If the product operating with abnormal noise, or shaking seriously.
Please stop use this product, and send back to the service agent to check
it. Never repair the product by yourself.
ENVIRONMENT FRIENDLY DISPOSAL
You can help to protect the environment!
Please remember to respect the local regulations: hand in the
non working electrical equipments to an appropriate waste
disposal center.
Storage
1. After use the product, please repack the product, and store it in a dry
place and avoid sun exposure.
2. Make sure the children could not reach the product.
3. Keep the product dry before repack.