08
9. Properly clean the mounting location on the
interior of the vehicle with cloth to make sure
the glass is clean and dry.
10. Adjust the angle of bracket to make sure the
forward facing unit is vertical (sky to ground
then lock the bracket in position with the
screws on each side.
11. Remove the 3M adhesive tape from the
bracket, place it in the desired mounting
location, firmly press and hold the camera for
1 minute to adhere tape.
NOTE:
Picture below shows how the external facing camera should be mounted. If surface is not cleaned properly before
mounting, device will have issues sticking and you may experience device falling from glass.
For more information, please visit our website www.MiFleet.us/support
